Description

Summary

Building on the success of the VideoMic Pro, the defacto standard for DSLR on-camera audio, and RØDE’s originalStereo VideoMic, the new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.

Based around a matched pair of high sensitivity ½”cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.

The Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.

The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.

A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.

Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.

The RØDE Stereo VideoMic Pro is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.

Features

Broadcast recording quality on-camera microphone
Matched pair 1⁄2” condenser capsules in XY stereo configuration
Ultra lightweight, compact form factor
On mic power and EQ controls
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered - over 100 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output
Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting

Specifications

Acoustic Principle	Pressure Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern
Address Type	End
Frequency Range	40Hz - 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)	20dB-A
Power Options
Weight	115.00gm
Dimensions	130.00mmH x 66.00mmW x 108.00mmD
Output