Shorter and lighter than the NTG3 and with a flatter bass response, the Rode NTG5 moisture-resistant shotgun microphone lets you capture natural, uncolored sound indoors or outside for your next indie film, TV shoot, or documentary project without weighing down your rig.
Professional-level features such as ultralow-noise circuitry, a smooth off-axis response, and a tightly controlled low end make it ideal for a range of location recording scenarios. Plus, it includes a furry windshield and a pistol grip shockmount that can be attached to a boompole for increased versatility.
The NTG5's extremely high sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG5 delivers acoustic transparency due to its pioneering circular acoustic ports, gentle rise in high frequencies, and rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. RF-bias technology and conformal coating ensure reliable performance even in severe conditions.
Designed to Withstand Adverse Environmental Conditions
When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG5's RF-bias technology and conformal coating provide excellent resistance to moisture, cold, and dust, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.
Broadcast-Quality Sound
The NTG5 was engineered for transparency and all-weather performance. The combination of the NTG5's 8" long body, revolutionary circular acoustic ports, and supercardioid polar pattern yields focused on-axis directionality, smooth off-axis response, and a transparent tone with tightly controlled low end. Its ultralow self-noise of 10 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
Phantom Powered
Thanks to its 3-pin XLR output and compliance with 48 VDC phantom power, the NTG5 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. The included short XLR cable—designed for use with the supplied pistol grip—features Neutrik and Switchcraft connectors and an integrated strain-relief junction box.
Ideal for Handheld Operation or Boompole Mounting
The NTG5 includes the PG2-R pistol grip shockmount, which impedes the transfer of vibrations to the microphone, and accommodates comfortable handheld operation or placement on a boompole. A mic clip is supplied in case you need to affix the NTG5 to a standard mic stand in a studio.
Windshield and Windscreen for Reduction of Wind Noise
The NTG5 has a foam windscreen to reduce unwanted light wind noise from fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, swap the windscreen for the included furry windshield.
Microphone
Form Factor Stand/Boom-Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Indicators None
On-Board Controls None
Windscreen Foam, Windsock/Windjammer (Included)
Performance
Frequency Range 20 Hz to 20 kHz
80 Hz to 20 kHz ±3 dB
Maximum SPL 130 dB SPL
Off-Axis Rejection 4 dB at 60°
20 dB at 120°
24 dB at 180°
Impedance 25 Ohms
Sensitivity -23.5 dBV/Pa at 1 kHz
Signal-to-Noise Ratio 84 dB
Equivalent Noise Level 10 dB A-Weighted
Connectivity
Output Connectors 1 x XLR 3-Pin Male (on Mic)
Wireless Connectivity None
Power
Operating Voltage 48 V
Operating Current Consumption 2 mA
Physical
Color Black
Mounting Mic Clip, Shockmount (with Included Hardware)
Construction Material Aluminum
Dimensions ø: 0.75 x L: 7.99" / ø: 19.00 x L: 203.00 mm (Microphone)
H: 9.45 x W: 2.36 x L: 4.61" / H: 240.00 x W: 60.00 x L: 117.00 mm (Mount)
Weight 2.68 oz / 76 g (Microphone)
7.90 oz / 224 g (Mount)
