Capture sharp, detailed photos and video at depths as great as 50' beneath the surface with your Canon EOS R5 mirrorless camera in Ikelite's Underwater Housing with DL Port Mount and Vacuum Valve. Ergonomic mechanical controls, including pushbuttons, knurled knobs/dials, and levers, afford access to virtually all camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It's white on the front, top, sides, and bottom but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick release grip affords improved balance and handling while offering an attachment point for an optional lighting arm.
Add an optional B1A Bulkhead #46002 and Canon C1 Hotshoe (Manual) #46071 to enable reliable electrical triggering of external strobes. For TTL operation, add the optional DL5 DS Link Canon TTL Converter B1A Bulkhead and CT1 TTL Hotshoe Kit #46076 with a compatible Ikelite DS strobe. The DS Link can be programmed to the camera's specific TTL protocol and supports both first curtain and rear curtain sync up to the camera's maximum flash sync speed. Exposure compensation can be added or subtracted in the camera. A push button and indicator light on the side of the converter make it simple to switch back and forth between TTL and manual exposure underwater.
The housing ships without a required lens port, and it accepts all Ikelite Dry Lock (DL) series dome and flat ports for a broad array of zoom, macro, and wide-angle lenses. Zoom gears are available for many lenses, as well. For full compatibility details, see the port chart. The DL port system accommodates lenses with large diameters and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump to remove excess air and actually create a vacuum.
- Depth rating of 50'
- Made by hand in the USA from corrosion-resistant polycarbonate and ABS plastic blend
- White on the front, top, sides, and bottom to reflect sunlight and keep camera cool when shooting on or above water's surface
- Clear in back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls
- Nearly neutral buoyancy in fresh water
- Open-groove design suspends rear O-ring in a natural position, allowing for easier maintenance and preventing accidental twisting or stretching of O-ring
- The camera mounting plate enables quick installation and does not need to be removed for you to gain battery or memory card access
- Requires optional Ikelite B1A Bulkhead #46002 and Canon C1 Hotshoe (Manual) #46071 for triggering optional external strobes
- For TTL operation, add DL5 DS Link Canon TTL Converter B1A Bulkhead, CT1 TTL Hotshoe Kit #46076, and a compatible Ikelite DS strobe
- Ergonomic mechanical controls, including push-buttons, knurled knobs/dials, and levers
- Controls afford access to virtually all camera functions except the depth of field preview button, multifunction lock button, and multicontroller (can be pushed in for use as a user-programmable button)
- Supplied aluminum tray with left-hand quick release grip affords improved balance and handling while offering an attachment point for optional lighting arm
- Trigger lever is extendable for comfortable use when holding an optional right-hand quick-release grip
- Extra-large, soft-touch zoom knob located next to grip handle
- Ships without a required lens port
- Accepts all Ikelite Dry Lock (DL) series dome and flat ports for a broad array of zoom, macro, and wide-angle lenses
- Zoom gears are available for many lenses
- Included vacuum valve for checking watertight integrity before dive; separately sold pump required to remove excess air and actually create a vacuum
