As a smaller, simplified version of the extremely versatile VideoMic NTG, the Rode VideoMic GO II ultracompact shotgun microphone is a radical departure from the original VideoMic GO, with significant upgrades to the body, shockmount, cable, and more. It gives video content creators, run-and-gun filmmakers, voiceover artists, and podcasters the sound of the highly regarded NTG shotguns in a convenient camera-mount mic that works with cameras, portable recorders, iOS and Android mobile devices, and USB-equipped computers.
Use the VideoMic GO II as a traditional shotgun mic for your DSLR or turn it into a digital microphone by connecting it to your smartphone, tablet, or laptop with separately available cables; in both configurations it delivers focused directivity, low noise, and isolation from external vibrations. When used as a USB microphone, the 3.5mm jack functions as a headphone output for monitoring the live signal or playback from your host device. Since the mic runs on plug-in power or USB power and has no controls or switches, it is easy and fast to operate.
What's New in Version II
Compared to the original VideoMic GO, the VideoMic GO II was thoroughly overhauled and loaded with design elements in form and function from Rode's popular VideoMic NTG. With upgrades to the body, shockmount, and cable, plus the ability to operate as an analog or digital USB microphone, this version is a completely different mic from the original VideoMic GO.
Technology Ported from the VideoMic NTG
The VideoMic GO II's body features acoustic perforations rather than the linear slots traditionally used in shotgun microphones. This annular line tube technology was ported from Rode's VideoMic NTG to deliver transparency and a natural, uncolored sound.
Directional Sound Pickup
The VideoMic GO II utilizes a supercardioid polar pattern to focus on the sound in front of it while attenuating other sounds from the sides and rear. Its low-noise electronics and sensitive condenser element deliver more detailed audio than mics typically found in cameras and portable recorders.
TRS Camera Connection
A detachable 3.5mm TRS cable is supplied to quickly hook up your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder. Both short and flat, the cord is easy to keep tidy.
Full USB Microphone Functionality
Plug the VideoMic GO II into your computer, smartphone, or tablet via USB to use it as a digital USB microphone for direct recording to your favorite software. Its integrated analog-to-digital converter operates at 24-bit / 48 kHz to provide full-resolution, uncompressed audio quality.
MFi-Certified for Apple iOS Mobile Devices
The VideoMic GO II is officially MFi-certified, unlocking complete compatibility with Lightning-equipped iOS devices, including iPhone, iPad, and iPod. Plug your VideoMic GO II into your iPhone, iPad, or iPod via USB with the Rode SC15 USB Type-C to Lightning accessory cable (available separately).
Convenient Headphone Monitoring
When using the VideoMic GO II as a USB microphone, plug your headphones into its 3.5mm output for convenient headphone monitoring.
Uses Plug-In Power or USB Power
No batteries are needed for the VideoMic GO II. It runs on plug-in power through the TRS connection to your camera, or it can be bus powered via USB.
Shockmount with Sliding Rail and Cable Management
Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to opt for a rugged Rycote Lyre suspension-style shockmount designed for attachment to a camera or boom pole. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. The shockmount's sliding rail system lets you shift the position of the mic forward or backward for perfect placement. Forget about messy cabling; the built-in cable management keeps the cord run orderly.
Windscreen Minimizes Wind Noise
The VideoMic GO II includes a foam windscreen to minimize unwanted wind noise from light breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode WS12 (available separately).
Works with Rode Connect
The VideoMic GO II can be fully integrated with Rode Connect software, allowing you to capture quality sound for your content with more freedom and flexibility than ever before, perfect for IRL streaming, recording podcasts, and more.
Microphone
Primary Applications Audio for Video
Form Factor Camera-Mount / Shotgun Mic
Intended Sound Sources Speech/Voice Over, Room Ambiance
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Electret Condenser
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Indicators 1 x Blue Single LED (Power)
On-Board Controls None
Windscreen Foam (Included)
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 110 dB SPL
Impedance 2.2 Kilohms
Sensitivity -31 dBV at 1 kHz
Dynamic Range 95 dB A-Weighted
Signal-to-Noise Ratio 79 dB A-Weighted
Equivalent Noise Level 15 dB A-Weighted
Connectivity
Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Female (on Mic)
Output Connectors (Digital) 1 x USB Type-C Female (on Mic)
Headphone Connector None
Wireless Connectivity None
Bluetooth None
Digital Audio
A/D Conversion 24-Bit
Sample Rate 48 kHz
Operating System Support Android, Windows, iOS, macOS/OS X
Mobile Device Compatibility iPhone 6 or Later
iPad Pro 1st Gen. or Later
iPad Air 1st Gen. or Later
iPad 6th Gen. or Later
iPad Mini 2 or Later
iPod Touch 7th Gen.
Android Smartphone
Android Tablet
Available Port USB 2.0
Power
Bus Power USB
Operating Voltage 2 to 5 V (Plug-In Power)
5 V (USB Bus Power)
Physical
Color Black
Mounting Camera/Shoe-Mount, Shockmount (Included)
Included Case None
Included Filters None
Dimensions ø: 0.9 x L: 4.7" / ø: 21.6 x L: 120 mm (Microphone)
H: 3.4 x W: 2.8 x L: 5.9" / H: 86 x W: 70 x L: 150 mm (with Mount, with Windscreen)
Weight 1.2 oz / 33 g (Microphone)
3.4 oz / 96 g (with Mount, with Windscreen)
Packaging Info
Package Weight 0.505 lb
Box Dimensions (LxWxH) 8.4 x 4.7 x 3.3"
