The NiSi IP-A Cinema Kit for iPhone brings the ultimate cinema experience to your iPhone! It features the IP-A iPhone filter holder, Black Mist 1/4, True Color ND-VARIO Pro Nano 1-5stops Variable ND, NiSi Allure-Streak BLUE Filter, NiSi Allure-Streak ORANGE Filter and pouch.
The NiSi IP-A Filter Holder for iPhone® is compatible with NiSi IP-A circular filters and NiSi P2 square filter holder (sold separately). Stack up to 3 circular NiSi IP-A filters to the filter holder, or two filters with no vignetting using 0.5X camera mode. To install NiSi IP-A, circular filters align the circular filter bayonet to three installation positions. Ensure that the outer bayonet of the filter aligns with the IP-A holder slot and turn clockwise to tighten. If multiple filters need to be installed, align the three bayonets on the second round filter with the three holes on the filter clip slot fixed on the IP-A holder. Ensure that the outer bayonets of the filter are completely aligned with the round filter clip slot, then turn clockwise to tighten.
NiSi IP-A Filter Holder for iPhone®
The NiSi IP-A Filter Holder for iPhone® brings filters to your iPhone® through NiSi’s quick and easy patented bayonet mount. Specifically designed for iPhone, the IP-A Filter holder is attached to the top of the phone, and the locking screw attaches to the front of the phone, securing the filter holder. The registration hole attaches to the back of the phone, aligning with the registration hole. Turn the locking screw clockwise until the IP-A holder is secure.
The NiSi IP-A Filter Holder for iPhone® is compatible with NiSi IP-A circular filters and NiSi P2 square filter holder (sold separately).
NiSi Black Mist 1/4 Filter for IP-A Filter Holder
The NiSi Black Mist 1/4 Filter for IP-A Filter Holder creates that cinematic look and is commonly used to soften wrinkles, blemishes and create a flattering image of a subject. It lowers contrast, and highlights within the frame are diffused, helping to balance the tonal range among highlights and shadows.
Suppress highlights and lift shadows
NiSi’s Black Mist suppresses highlights and lifts shadows for well-balanced contrast. Light sources maintain a strong center with a pleasing glow from the light source.
Black Mist is for many applications.
Not only for portrait photography, Black Mist filters can also be used in other scenes, such as night photography, landscape, and still life… to create a cinematic atmosphere. Black Mist adds extra blooming and gradients to the highlights in your scene. Any direct light source will become more film-like, with a smoother, buttery texture around the highlights.
NiSi True Color ND-VARIO Pro Nano 1-5stops Variable ND Filter for IP-A Holder
The NiSi True Color ND-VARIO Pro Nano 1-5stops Variable ND Filter for IP-A Holder provides an exposure reduction of 1 to 5 stops to capture real motion blur or lock in the best exposure time. The 0.3 to 1.5 density creates a darkening of the entire image, allowing wider apertures or slower shutter speeds than usually possible. The degree of density is easily controlled by rotating the front filter ring. By slowing your exposure time or increasing your aperture, you can control the depth of field and convey movement more easily. The transition of density occurs smoothly, which allows the photographer or videographer to adjust exposure length to the exact amount required for a given scene. For easier, repeatable control over density settings, the front ring is visually marked with numbers representing the different stop values.
The Variable ND offers True Color that avoids color shift seen in other Variable filters. The NiSi True Color ND-VARIO Pro Nano 1-5stops Variable ND is made from high-definition optical glass for the best resolution and quality. The glass is coated using the NiSi Nano coating, providing a waterproof, oil-proof and anti-reflective coating to avoid ghosting and reflections.
NiSi Allure-Streak BLUE Filter
The NiSi Allure-Streak BLUE Filter for IP-A Filter Holder (2mm) is a special effects filter designed to render a single light ray from a point light source. This filter features a single series of etched lines spaced 2mm apart, which run across the filter surface. The filter creates the effect of elongated blue streaks horizontally from the light source usually seen when using an Anamorphic type of lens. The filter has a rotating front (similar to how a CPL rotates) and when the filter is rotated, the orientation of the light ray can be adjusted to suit your composition or desired effect.
We recommend longer focal lengths with our streak range to ensure a straight steak from the light source free from lens distortion.
NiSi Allure-Streak ORANGE Filter
The NiSi Allure-Streak ORANGE Filter for IP-A Filter Holder (2mm) is a special effects filter designed to render a single light ray from a point light source. This filter features a single series of etched lines spaced 2mm apart, which run across the filter surface. The filter creates the effect of elongated orange streaks horizontally from the light source usually seen when using an Anamorphic type of lens. The filter has a rotating front (similar to how a CPL rotates) and when the filter is rotated, the orientation of the light ray can be adjusted to suit your composition or desired effect.
We recommend longer focal lengths with our streak range to ensure a straight steak from the light source free from lens distortion.
NiSi Pouch for 4 Filters and Holder
The NiSi Pouch for 4 Filters and Holder features a hard shell exterior and is lined internally with soft microfiber to protect your filters. The pouch features a strap to hold the IP-A filter holder. It’s designed from a lightweight material that protects your filters from scratches.
